通过利用喷（抛）丸对金属表面进行处理从而达到强化、清理的工艺正越来越被人们重视，此工艺的推广与应用给机械与设备的制造带来了新的工业开始。喷（抛）丸设备、工艺、喷（抛）丸材料是决定一个工艺成败的三个关键要素。
赛普金属制品有限公司是一家专业从事高端喷（抛）丸的研发、生产与销售，公司技术力量雄厚，有国内外多名专家作技术支持。产品包括了金属类(强化钢丸、不锈钢丸、铜丸、铝丸)与非金属类（陶瓷丸）的多种高端磨料，产品符合国外多种标准，SAE J441，VDFI8001,AMS2431,MIL-C-13165等，同时也可为客户订制各种非标的金属磨料。产品广泛应用于各种承受交变载荷的机械零部件的强化、各种压铸件、铸造件的表面去毛刺与飞边、各种金属及非金属表面的处理。
There are numerous applications of cut wires shot to "clean" metallic pieces :
· in foundries, for the de-sanding and cleaning of pieces,
· in the steel industry for the de-scaling of sheet metal, billets, profiles...
· in metal construction, for the preparation of surfaces before painting or metallisation.
· shot peening, or prestressed abrasives, the shot demonstrates more efficiency and innovation again.
Indeed, this process strengthens the subject pieces (springs or gear-boxes) considerably as they are subjected to an intense fatigue, and gives a good cost/performance ratio !
What are the advantages of cut wire shot abrasives ?
Abrasives have made great advances in surface treatment :
· Cleanliness - Environment :
Shot blasting is a mechanical process carried out in an enclosed place so it does not generate any risk of environmental pollution. The abrasive is used several times as it is recycled. · Simplicity and mastery of the process :
It works in a very simple way and is therefore quickly in use: the implementation can start as soon as the hose is connected. Technically the projection controls itself easily. Once the parameters of the operation (speed, angle of projection, time of shot blasting...) are defined, the reproducibility is perfect.
· Security :
Shot Blasting is practically an operation without risk to the operators and presents no danger to the environment.
· Cost efficiency
Economic, shot blasting combines efficiency with cost control. Thanks to a good assessment of requirement and how to implement, the result obtained is without surprise. The surface preparation is uniform on the whole piece from the first treatment, thus avoidin g waste and loss of time.
· The cleaning of metallic pieces and their surface preparation prior to coating or for appearance.The pieces are blasted with steel abrasives in machines that are especially designed for this propose.
· Granite cutting into fine slices : grit particles are used as it were as gangsaw teeth
· The enhanced performance,by work hardening, of pieces working under fatigue (springs, gears ...)
performance , by work hardening, of pieces working under fatigue (springs, gears...) Ballast
